Sunday, 23 July 2017

Warhammer 40: Space Wolves Primaris progress #2

My Space Wolves are advancing, slowly. I hit a low point last weekend when after spending so much time painting grey, when I realised they were pretty much back to sprue grey - which feels like you haven't achieved anything despite the time spent.

However! After edge highlighting, chipping and shading I'm at this stage with a couple of the test troops.


Pardon the wobbly photo, but hopefully it gives an idea of how much weathering I'm attempting to apply. This also helped to give me afirmation that this is the effect and style I want in these troops - they've reached the battlefield and thrown themselves in at the deep end.

Adding the redish brown as the shade helps to lift the greys, as it was quite desaturated with the cool greys, and this gives some much needed definition. Next up is adding highlights under a few of the larger and medium sized chips, then painting the shoulderpads and knees with chapter colours.

Picking out suitable heads to bring that Space Wolf feel to the figures is key, and rummaging through my bits box has yielded a lot more heads than I thought ...


27 heads there and there were another ~10 heads available, but they didn't sit correctly inside the armour and I've discarded those for this project. The next challenge is working out which head fits best with each figure to give the right feel. Hooded models like the Captain and Inceptors need shorter hair, whereas the Intercessors can afford the crazier Viking/anime haircuts.

There's a painting competition at my local GW next weekend, and one of these figures needs to be finished. Upside: it's next weekend. Downside: I only have until Wednesday night as I'm away next weekend. This will be entertaining for a serial procrastinator like myself.

Saturday, 15 July 2017

Terrain, and weathering with chipping medium

Well this was a more productive weekend than expected ... here's all the scenery finished up!



A reminder that this is all from the wonderful Crooked Dice, just to give them the recognition they deserve for such excellent pieces. If it has an orange earth then it's from their Junk Piles range, and if it doesn't then it's from the Drum & Crate Barricades selection.

Initial attempts at using the chipping medium didn't yield the results I wanted. My first attempts were only successful in spreading paint around instead of removing it. Bit of (metaphorical) hair pulling and reading, and this excellent tutorial by Tibbs, which covers it succinctly. In short, I was doing it wrong. Not just dabbing the area with water but soaking it then taking away the excess. After that, it's sharper objects like toothpicks that yield the best results and taking away

Here's a few close-up shots to see detail a little better - but I'm happy with the final result of pieces and the natural weathering effect the chipping method provided.








Terrain everywhere. So much of it.

Thursday, 13 July 2017

Warhammer 40k: Space Wolves Primaris progress

... or how to spend seven hours feeling like you've achieved nothing. NOTHING.

After priming my marines, I wanted to weather them differently to how my other marines have been done. The old method was sponge dabbing the chips on, but this time I wanted to try a different method - chipping medium.

First step is to apply two different browns on the models - starting with all over Dark Fleshtone, then covering a random 50% of each model with Parasite Brown.


Out of shot, I've applied the same process to arms, legs and other missing pieces. But you don't need to see those in the test shot.

After this, a full coverage of Vallejo's Chipping Medium - which works surprisingly well straight through the airbrush from the pot. Then it's Dark Grey Blue to cover everything so no brown is visible.


So after two full sessions I'm now back to sprue grey! Brilliant. Well done me, what a great use of time.

It's a little demoralising at this point to realise nothing appears to have changed, but I'm hopeful the next few stages will help change that impression. This approach takes a little longer in the preparation but I'm hopeful the extra effort is worthwhile, and will look great on the support vehicles later too. Bear with me, future posts should be more interesting - but this feels like an important stage of the process.

Before the chipping begins, I've also started painting some terrain pieces to act as my test area for this technique. It's designed to be debris and ruins, so if everything goes horribly wrong at this point ... it doesn't matter so much! This makes me feel better than trying it straight on the marines and failing hard.


Shout out to the excellent Crooked Dice for their junk piles and containers shown above, they're great scenery pieces and the range they had on display at Salute 2017 was excellent. Perfect test material for new techniques. Ignore the ork shaman in the corner. He's for another post at some point :)

I played with a few test colours to get an idea of how I want the highlight stages to go - and below is the very, very rough sketch of colour transitions.


This moves from pure Dark Grey Blue up to pure Wolf Grey, with a few inbetween steps. Just to stress, the above is only a sketch to let me see each colour over the top of the last. My hope is the final version will be a lot smoother!

Sunday, 9 July 2017

Warhammer 40k: Space Wolves Primaris emerge

I'm jumping back into 40k with 8th edition. Hello to you Mr Bandwagon.

My gaming pretty much stopperd when 6th edition landed due to a family emerging and everything else taking priority. In the interim I've gotten big grown-up jobs and felt it was justifiable to treat myself and went all in ... so that meant a collector's edition, all five indexes and the Dark Imperium starter set.


Would I recommend the collector's edition for the price tag? Hmm, not sure - it's very expensive for what you get, and in an ideal world it would have been around the £150 mark ... but that's what tax rebates are for! However, quality is excellent and I'm a happy chap.

Building of the Marines has now commenced. I'm trying to built them as sub assemblies with the least effort possible - which is pretty straight forward so far. Mostly involving not gluing on the gun arm for the majority of figures. Assault marines glues at weird angles temporarily, because I want to do something with them that doesn't involve the transparent plastic rods.


What do I want to do with them, you ask? I haven't a flippin' clue at the moment, but can't abide their default pose which looks like they're in a local amateur theatre production with wire-flying. Next up is the painful process of mould line removal ...

Thursday, 6 July 2017

Wolves, wolves, wolves - final groupshots

Well here we are - all the wolves from Zombicide: Black Plague, Conan, Blood Rage and 40k finished up! Phew. Here are the full group shots of everything.





That's a total of 40 wolves, and I feel vindicated in my decision to paint them in two large batches using the same techniques but different colours. It adds enough variety to not feel monotonous, and that's just what I wanted - so this has been a great success. They've also served a purpose as a useful palette cleanser between other, more complex pieces too. Would definitely take this approach again, as there's enormous satisfaction to see more figures leave the pile of grey and join the painted ranks.

Monday, 3 July 2017

Warhammer 40k: Fenrisian Wolves pt.2

And here we are with the definitely, positively, absolutely last wolves to be painted - the final four Fenrisian Wolves. Well ... until I realise more are needed, obviously ...


Similar approach to the grey test model. Started with a black undercoat and have airbrushed up to lighter colours, then washed and drybryshed. They're not much more than tabletop quality, and that's fine with me.

You may be able to see a glint of metal from underneath the base. I've added a washer to each figure. Purpose is two-fold: to add weight and to use for transportation on a magnetic sheet in the future.

Sunday, 2 July 2017

Wolves, wolves, wolves pt.2

The second large tabletop-quality batch of wolves - covering Zombicide: Black Plague and Conan.



Again, there's nothing complex here, just block painted to get them in our games soon as possible. I make no apologies for the liberal use of blood - thanks to various mixes of Tamiya X-27 Clear Red and purple ink.

More figures that can move from the "to do" to the "completed" list and adding that little more character to our Tuesday night gaming sessions. Marvellous.

Saturday, 1 July 2017

Homebrew Objective Markers

Dusting off the 40k boxes and found old objective markers I made from scratch and thought I'd share. Not fancy, but effective on the table.





The former is empty paintpots, and the latter is MDF offcuts from an old project, and some sort of plug that was lying around.